Toyota Tundra 2005 Service - Repair - Maintenance page 3512

Hide thumbs Also See for Tundra 2005:

Table of Contents

INTRODUCTION

4. ANTI-RUST TREATMENT

(a) BODY SEALER APPLICATION

(1) For water-proofing and anti-corrosion measures, al-

ways apply the body sealer to the body panel seams

and hems of the doors, hoods, etc.

(b) UNDERCOAT APPLICATION

(1) To prevent corrosion and protect the body from dam-

age by flying stones, always apply sufficient under-

coat to the bottom surface of the under body and in-

side of the wheel housings.

5. ANTI-RUST TREATMENT AFTER PAINTING

(a) ANTI-RUST AGENT (WAX) APPLICATION

(1) To preserve impossible to paint areas from corrosion,

always apply sufficient anti-rust agent (wax) to the in-

side of the hemming areas of the doors and hoods,

and around the hinges, or the welded surfaces inside

the boxed cross-section structure of the side member,

body pillar, etc.