Ip Msdp Sa-Filter; Ip Msdp Sa-Limit - Dell Force10 Z9000 Reference Manual

ip msdp sa-filter

Permit or deny MSDP source active (SA) messages based on multicast source and/or group from the specified peer.
E-Series, Z-Series, S4810
Syntax ip msdp sa-filter {in | out} peer-address list [access-list
name]
Remove this configuration using the no ip msdp sa-filter {in | out} peer
address list [access-list name] command.
Parameters
in
out
peer-address
access-list name
Defaults Not configured.
Command Modes CONFIGURATION
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.7.1.0

ip msdp sa-limit

Configure the upper limit of source-active (SA) entries in SA-cache.
E-Series, Z-Series, S4810
Syntax ip msdp sa-limit number
To return to the default, use the no ip msdp sa-limit number command.
Parameters
number
Defaults 50000
Command Modes CONFIGURATION
Command History
Version 8.3.11.1
Enter the keyword in to enable incoming SA filtering.
Enter the keyword out to enable outgoing SA filtering.
Enter the peer address of the MSDP peer in a dotted decimal format
(A.B.C.D.).
Enter the name of an extended ACL that contains permitted SAs. If
you do not use this option, all local entries are blocked.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series.
Enter the maximum number of SA entries in SA-cache. The range is 0
to 40000.
Introduced on the Z9000.
985