Defaults
Enabled.
Command Modes
ROUTER BGP
Command History
Version
9.9(0.0)
9.2(1.0)
8.2.1.0
7.4.1.0
Usage Information This command is a knob to disable BGP next-hop resolution via BGP learned routes.
During the next-hop resolution, only the first route that the next-hop resolves through
is verified for the route's protocol source and is checked if the route is learned from
BGP or not.
The clear ip bgp command is required for this command to take effect and to keep
the BGP database consistent. Execute the clear ip bgp command right after
executing this command.
Related
clear ip bgp
Commands
bgp regex-eval-optz-disable
Disables the Regex Performance engine that optimizes complex regular expression with BGP.
C9000 Series
Syntax
bgp regex-eval-optz-disable
To re-enable optimization engine, use the no bgp regex-eval-optz-disable
command.
Defaults
Enabled.
Command Modes
ROUTER BGP (conf-router_bgp)
Command History
Version
9.9(0.0)
9.2(1.0)
8.2.1.0
7.6.1.0
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the E-Series ExaScale.
Introduced
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the E-Series ExaScale.
Introduced
Border Gateway Protocol
576