Set Extcommunity Soo - Dell C9000 Series Reference Manual

non-trans
Defaults none
Command Modes ROUTE MAP (config-route-map)
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.7.1.0
7.6.1.0
Usage Information If the set community rt and soo are in the same route-map entry, the behavior defines
as:
Related

set extcommunity soo

Commands
set extcommunity soo
To set extended community site-of-origin in Route Map, use this feature.
C9000 Series
Syntax
set extcommunity soo {as4 ASN4:NN | ASN:NNNN | IPADDR:NN [non-
trans]}
(OPTIONAL) Enter the keywords non-trans to indicate a non-
transitive BGP extended community.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T
Introduced on the Z-9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
• If the rt option comes before soo, with or without the additive option, soo
overrides the communities rt sets.
• If the rt option comes after soo, without the additive option, rt overrides the
communities soo sets.
• If the rt with the additive option comes after soo, rt adds the communities
soo sets.
— sets the extended community site-of-origin in the route-map.
Border Gateway Protocol 555