Bgp Bestpath Med Missing-As-Best - Dell C9000 Series Reference Manual

Version
8.2.1.0
7.4.1.0
Usage Information The software compares the MEDs only if the path contains no external autonomous
system numbers.
If you enable this command, use the clear ip bgp * command to recompute the
best path.

bgp bestpath med missing-as-best

During path selection, indicate preference to paths with missing MED (MULTI_EXIT_DISC) over those paths
with an advertised MED attribute.
C9000 Series
Syntax
bgp bestpath med missing-as-best
To return to the default selection, use the no bgp bestpath med missing-as-
best command.
Defaults Disabled
Command Modes ROUTER BGP
Command History
Version
9.9(0.0)
9.2(1.0)
8.2.1.0
7.4.1.0
Usage Information The MED is a 4-byte unsigned integer value and the default behavior is to assume a
missing MED as 4294967295. This command causes a missing MED to be treated as 0.
During the path selection, paths with a lower MED are preferred over those with a
higher MED.
Description
Introduced on the E-Series ExaScale.
Introduced
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the E-Series ExaScale.
Introduced
Border Gateway Protocol 566