Show Ip Bgp Ipv4 Extcommunity-List - Dell C9000 Series Reference Manual

Related set extcommunity rt
Commands map.

show ip bgp ipv4 extcommunity-list

To display the IPv4 routes matching the extended community list name, use this feature.
C9000
Syntax
show ip bgp [ipv4 [multicast | unicast] | ipv6 unicast]
extcommunity-list name
Parameters
multicast
unicast
ipv6 unicast
name
Defaults none
Command Modes
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
7.8.1.0
7.7.1.0
7.6.1.0
Usage Information If there is a type or sub-type that is not well-known, it is displayed as:TTSS:XX:YYYY.
— sets the extended community route origins using the route-
Enter the keyword multicast to display the multicast route
information.
Enter the keyword unicast to display the unicast route
information.
Enter the keywords ipv6 unicast to display the IPv6 unicast
route information.
(OPTIONAL) Enter the name of the extcommunity-list.
• EXEC
• EXEC Privilege
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Border Gateway Protocol 557