Administered Connection - Avaya Communication Manager Administrator's Manual

Screen Reference

Administered Connection

Administered Connection
This screen assigns an end-to-end Administered Connection (AC) between two access endpoints or data
endpoints. The AC is established automatically by the system whenever the system restarts or the AC is
due to be active. See
additional information.
Field descriptions for page 1
Figure 113: Administered Connection screen
change administered-connection
Connection Number:
Destination:
AUTHORIZED TIME OF DAY
MISCELLANEOUS PARAMETERS
Connection Number
This is a display-only field showing an unassigned AC number when the screen is accessed using an
administration command such as
Destination
Used to route the AC to a desired endpoint. Enter the address of the destination access or data endpoint.
This endpoint is the terminating party of the AC and need not be local to the server on which the AC is
assigned. The entry must be consistent with the local Communication Manager server's dial plan (that is,
the first digits are assigned as an extension, feature access code, or trunk access code, or DDD Number).
If a local extension is entered, it must be assigned to either an access or data endpoint. Abbreviated
Dialing entries may be used in this field.
Valid entries
624
Administered connections
ADMINISTERED CONNECTION
1
Originator: ________
__________________________________
Name: __________________
Continuous? n
Sun? n Mon? n Tue? n Wed? n Thu? n
Start Time: 00:00
Duration: 000:00
Alarm Type: warning
Priority: 5
change or
Usage
Enter the assigned access endpoint/data module extension or valid
dialed string.
Administrator's Guide for Avaya Communication Manager
on page 1349 and Access Endpoint
Enable? y
Alarm Threshold: 5
Retry Interval: 2
Auto Restoration? y
display .
on page 619 for
Page 1 of 1
Fri? n Sat? n
November 2003