Avaya Communication Manager Administrator's Manual page 622

Screen Reference
Access Endpoint
(Starting) Port
Enter the necessary characters.
Valid entries
01 through 44
(DEFINITY R) or
01 through 03
(DEFINITY CSI, SI) or
1 through 64
(S8700 IP-Connect / S8700
Multi-Connect / S8300 Media
Server)
A through E
0 through 20
01 through 04
(Analog TIE trunks)
01 through 31
1 through 80
(DEFINITY R, CSI) or
1 through 10 (DEFINITY SI)
or
1 through 250
(S8700 IP-Connect / S8700
Multi-Connect / S8300 Media
Server)
V1 through V9
01 through 31
For example, 01A0612 is in cabinet 01, carrier A, slot 06, and circuit number (port) 12.
NOTE:
For Wideband Access Endpoints, analog tie trunks cannot be used and the DS1 Interface
circuit pack, Version C or later, must be used.
The DS1 circuit number corresponds to the channel that will carry the data traffic. Channels 1 through 31
(DS1 Interface only) or channels 1 through 24 (DS1 Tie Trunk, DS1 Interface, or DS1 Interface (32)
circuit packs) can be used when the
Channel or ISDN-PRI signaling, channel use is limited to channels 1 through 30 (DS1 Interface circuit
pack only) or channels 1 through 23 (DS1 Interface (32) or DS1 Interface ). A channel can be
administered as an access endpoint regardless of the DS1 signaling type.
622
Usage
First and second characters are the cabinet number.
Third character is the carrier.
Fourth and fifth characters are the slot number.
Six and seventh characters are the circuit number.
Gateway
Module
Circuit
field is robbed-bit or isdn-ext. For Common
DS1 Signaling Type
Administrator's Guide for Avaya Communication Manager
November 2003