Siemens SINAMICS G List Manual page 95

p0488[0...2] Measuring probe 1 input terminal / Meas probe 1 input
VECTOR Can be changed: U, T
Data type: Integer16
P-Group: Encoder
Min
0
Description: Sets the input terminal to connect probe 1.
Values: 0:
1:
2:
3:
4:
5:
6:
Index: [0] = Encoder 1
[1] = Encoder 2
[2] = Encoder 3
Dependency: Refer to: p0489, p0728
Note: DI/DO: Bidirectional digital input/output
The terminal must be set as input (p0728).
Refer to the encoder interface for PROFIdrive.
p0489[0...2] Measuring probe 2 input terminal / Meas probe 2 input
VECTOR Can be changed: U, T
Data type: Integer16
P-Group: Encoder
Min
0
Description: Sets the input terminal to connect probe 2.
Values: 0:
1:
2:
3:
4:
5:
6:
Index: [0] = Encoder 1
[1] = Encoder 2
[2] = Encoder 3
Dependency: Refer to: p0488, p0728
Note: DI/DO: Bidirectional digital input/output
The terminal must be set as input (p0728).
Refer to the encoder interface for PROFIdrive.
p0491 Motor encoder fault response: ENCODER / Fault resp ENCODER
VECTOR Can be changed: T
Data type: Integer16
P-Group: Encoder
Min
0
Description: Sets the behavior for the ENCODER fault response (motor encoder).
This means, for example, if an encoder fault occurs, sensorless operation can be automatically selected with a
shutdown behavior that can be selected.
 Siemens AG 2004 All Rights Reserved
SINAMICS G List Manual, Edition 12.2004
No probe
DI/DO 9 (X122.8)
DI/DO 10 (X122.10)
DI/DO 11 (X122.11)
DI/DO 13 (X132.8)
DI/DO 14 (X132.10)
DI/DO 15 (X132.11)
No probe
DI/DO 9 (X122.8)
DI/DO 10 (X122.10)
DI/DO 11 (X122.11)
DI/DO 13 (X132.8)
DI/DO 14 (X132.10)
DI/DO 15 (X132.11)
Data set: -
Units group: -
Max
6
Data set: -
Units group: -
Max
6
Data set: -
Units group: -
Max
3
Parameters
Parameter list
Access level: 3
Function diagram: 4740
Unit selection: -
Factory setting
0
Access level: 3
Function diagram: 4740
Unit selection: -
Factory setting
0
Access level: 3
Function diagram: -
Unit selection: -
Factory setting
0
1-95