Table of Contents
Advertisement
p1323[0...n]
V/f control programmable characteristic voltage 2 / Uf char U2
VECTOR
Can be changed: U, T
Data type: Floating Point
P-Group: V/f control
Min
0.0 [Veff]
Description:
The programmable characteristic for the V/f control is defined using 4 points and 0 Hz/p1310.
This parameter specifies the voltage of the second point along the characteristic.
Dependency:
Refer to: p1310, p1311, p1320, p1321, p1322, p1324, p1325, p1326, p1327
p1324[0...n]
V/f control programmable characteristic frequency 3 / Uf char f3
VECTOR
Can be changed: U, T
Data type: Floating Point
P-Group: V/f control
Min
0.00 [Hz]
Description:
The programmable characteristic for the V/f control is defined using 4 points and 0 Hz/p1310.
This parameter specifies the voltage of the third point along the characteristic.
Dependency:
Refer to: p1310, p1311, p1320, p1321, p1322, p1323, p1325, p1326, p1327
p1325[0...n]
V/f control programmable characteristic voltage 3 / Uf char U3
VECTOR
Can be changed: U, T
Data type: Floating Point
P-Group: V/f control
Min
0.0 [Veff]
Description:
The programmable characteristic for the V/f control is defined using 4 points and 0 Hz/p1310.
This parameter specifies the voltage of the third point along the characteristic.
Dependency:
Refer to: p1310, p1311, p1320, p1321, p1322, p1323, p1324, p1326, p1327
p1326[0...n]
V/f control programmable characteristic frequency 4 / Uf char f4
VECTOR
Can be changed: U, T
Data type: Floating Point
P-Group: V/f control
Min
0.00 [Hz]
Description:
In the servo control mode the following applies:
The linear characteristic for the V/f control is defined by 0 Hz / p1319 and p1326 / p1327.
For closed-loop vector control, the following applies:
The programmable characteristic for the V/f control is defined using 4 points and 0 Hz/p1310.
This parameter specifies the voltage of the fourth point along the characteristic.
Dependency:
In the servo control mode the following applies:
Activates the V/f control using p1317.
For closed-loop vector control, the following applies:
Selects the freely programmable characteristic using p1300 = 3.
Refer to: p1310, p1311, p1320, p1321, p1322, p1323, p1324, p1325, p1327
Siemens AG 2004 All Rights Reserved
SINAMICS G List Manual, Edition 12.2004
Data set: DDS
Units group: VOLTAGE_AC_EFF Unit selection: -
Max
10000.0 [Veff]
Data set: DDS
Units group: FREQUENCY
Max
3000.00 [Hz]
Data set: DDS
Units group: VOLTAGE_AC_EFF Unit selection: -
Max
10000.0 [Veff]
Data set: DDS
Units group: FREQUENCY
Max
10000.00 [Hz]
Parameters
Parameter list
Access level: 3
Function diagram: 6300
Factory setting
0.0 [Veff]
Access level: 3
Function diagram: 6300
Unit selection: -
Factory setting
0.00 [Hz]
Access level: 3
Function diagram: 6300
Factory setting
0.0 [Veff]
Access level: 3
Function diagram: 5300,
6300
Unit selection: -
Factory setting
0.00 [Hz]
1-175
Hide quick links:
Advertisement
Table of Contents
