Siemens SINAMICS G List Manual page 73

Notice: The following parameters are influenced using p0340:
The parameters designated with (*) are, for list motors (p0300 > 100) not overwritten.
SERVO:
p0340 = 1:
--> All of the parameters influenced for p0340 = 2, 3, 4, 5
--> p0341 (*)
--> p0342, p0344, p0640, p1082, p2000, p2001, p2002, p2003
p0340 = 2:
--> p0350 (*), p0354 (*), p0356 (*), p0358 (*), p0360 (*)
--> p0625 (matching p0350)
p0340 = 3:
--> All of the parameters influenced for p0340 = 4, 5
--> p0325 (is only calculated for p0325 = 0)
--> p0348 (*) (is only calculated for p0348 = 0)
--> p0441, p0442, p0443, p0444, p0445 (only for 1FT6, 1FK6, 1FK7 motors)
--> p0492, p1082, p1980, p1319, p1326, p1327, p1612, p1752, p1755
p0340 = 4:
--> p1460, p1462, p1463, p1464, p1465, p1470, p1472, p1590, p1592, p1715, p1717
--> p1461 (for p0348 > p0322, p1461 is set to 100 %)
--> p1463 (for p0348 > p0322, p1463 is set to 400 %)
p0340 = 5:
--> p1037, p1038, p1520, p1521, p1530, p1531, p2140, p2142, p2150, p2162, p2163, p2164, p2175, p2177, p2194
VECTOR:
p0340 = 1:
--> All of the parameters influenced for p0340 = 2, 3, 4, 5
--> p0341 (*)
--> p0342, p0344, p0640, p1082, p1654, p1825, p1828, p1829, p1830, p1831, p1832, p1905, p2000, p2001,
p2002, p2003
p0340 = 2:
--> p0350 (*), p0352, p0354 (*), p0356 (*), p0358 (*), p0360 (*)
--> p0625 (matching p0350)
p0340 = 3:
--> All of the parameters influenced for p0340 = 4, 5
--> p0346, p0347, p0492, p1320, p1321, p1322, p1323, p1324, p1325, p1326, p1327, p1582, p1584, p1616,
p1744, p1755, p1756, p2178
p0340 = 4:
--> p1290, p1292, p1293, p1299, p1338, p1339, p1340, p1341, p1345, p1346, p1460, p1461, p1462, p1463,
p1464, p1465, p1470, p1472, p1590, p1592, p1715, p1717, p1740, p1760, p1761, p1764, p1767, p1781, p1783,
p1785, p1786
p0340 = 5:
--> p1037, p1038, p1520, p1521, p1530, p1531, p1802, p1803, p2140, p2142, p2150, p2162, p2163, p2164,
p2175, p2177, p2194
 Siemens AG 2004 All Rights Reserved
SINAMICS G List Manual, Edition 12.2004
Parameters
Parameter list
1-73