Siemens SINAMICS G List Manual page 109

p0742 BI: CU, signal source for terminal DI/DO 12 / CU S_src DI/DO 12
CU Can be changed: U, T
Data type: Unsigned32
P-Group: Commands
Min
-
Description: Sets the signal source for terminal DI/DO 12 (X132.7).
Note: DI/DO: Bidirectional digital input/output
Prerequisite: The DI/DO must be set as an output (p0728.12 = 1).
p0743 BI: CU, signal source for terminal DI/DO 13 / CU S_src DI/DO 13
CU Can be changed: U, T
Data type: Unsigned32
P-Group: Commands
Min
-
Description: Sets the signal source for terminal DI/DO 13 (X132.8).
Note: DI/DO: Bidirectional digital input/output
Prerequisite: The DI/DO must be set as an output (p0728.13 = 1).
p0744 BI: CU, signal source for terminal DI/DO 14 / CU S_src DI/DO 14
CU Can be changed: U, T
Data type: Unsigned32
P-Group: Commands
Min
-
Description: Sets the signal source for terminal DI/DO 14 (X132.10).
Note: DI/DO: Bidirectional digital input/output
Prerequisite: The DI/DO must be set as an output (p0728.14 = 1).
p0745 BI: CU, signal source for terminal DI/DO 15 / CU S_src DI/DO 15
CU Can be changed: U, T
Data type: Unsigned32
P-Group: Commands
Min
-
Description: Sets the signal source for terminal DI/DO 15 (X132.11).
Note: DI/DO: Bidirectional digital input/output
Prerequisite: The DI/DO must be set as an output (p0728.15 = 1).
r0747 CU, digital outputs status / CU DO status
CU Can be changed: -
Data type: Unsigned32
P-Group: Commands
Min
-
Description: Displays the status of digital outputs.
 Siemens AG 2004 All Rights Reserved
SINAMICS G List Manual, Edition 12.2004
Data set: -
Units group: -
Max
-
Data set: -
Units group: -
Max
-
Data set: -
Units group: -
Max
-
Data set: -
Units group: -
Max
-
Data set: -
Units group: -
Max
-
Parameters
Parameter list
Access level: 1
Function diagram: 1510,
2132
Unit selection: -
Factory setting
0
Access level: 1
Function diagram: 2132
Unit selection: -
Factory setting
0
Access level: 1
Function diagram: 2133
Unit selection: -
Factory setting
0
Access level: 1
Function diagram: 1510,
2133
Unit selection: -
Factory setting
0
Access level: 1
Function diagram: 2130,
2131, 2132, 2133
Unit selection: -
Factory setting
-
1-109