Siemens SINAMICS G List Manual page 19

Index
The name and meaning of each individual index is specified for indexed parame-
ters.
The following applies to the values (min, max, factory setting) of indexed setting
parameters:
• Min, Max:
The setting range and unit apply to all indices.
• Factory setting:
When all indices have the same factory setting, index 0 is specified with unit
to represent all indices.
When the indices have different factory settings, they are all listed individually
with unit.
Bit field
For parameters with bit fields, the following information is provided about each bit:
• Bit number and signal name
• Meaning with signal states 0 and 1
• Function diagram (optional)
The signal is shown on this function diagram.
Dependency
Conditions which need to be fulfilled in connection with this parameter. Also
includes special effects which can occur between this parameter and others.
see also: List of other relevant parameters.
 Siemens AG 2004 All Rights Reserved
SINAMICS G List Manual, Edition 12.2004
Parameters
Overview of parameters
1-19