Siemens SINAMICS G List Manual page 4

Safety Information
This manual contains information that you must observe for your personal safety and to avoid material
damage. The information is indicated by a warning triangle and displayed as follows according to the level
of risk:
Danger
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury or
in substantial property damage.
Warning
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury or
in substantial property damage.
Caution
Used with the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate injury or in property damage.
Caution
Used without safety alert symbol indicates a potentially hazardous situation which, if not avoided, may
result in property damage.
Notice
Used without the safety alert symbol indicates a potential situation which, if not avoided, may result in an
undesirable result or state.
Qualified Personnel
The device must only be commissioned and operated by qualified personnel. For the purpose of the
safety information in this documentation, a "qualified person" is someone who is authorized to operate,
ground, and tag devices, systems, and circuits in accordance with established safety procedures.
Proper Use
Observe the following information:
Warning
The device must only be used for the applications specified in the catalog and in the technical description.
The device must only be used in conjunction with external devices and components recommended or
approved by Siemens.
The successful and safe operation of this device depends on correct transport, proper storage and instal-
lation, as well as careful operation and maintenance.
Trademarks
SIMATIC
SINUMERIK
The designations in this documentation may be trademarks whose use by third-parties for their own
purposes may infringe the rights of the owner.
Copyright Siemens AG 2004 All Rights Reserved
The reproduction, transmission or use of this document or its contents
is not permitted without express written authority. Offenders will be li-
able for damages. All rights, including rights created by patent grant
or registration or a utility model or design, are reserved.
Siemens AG
Automation & Drives
Motion Control Systems
P.O. Box 3180, D-91050 Erlangen
Federal Republic of Germany
Siemens Aktiengesellschaft
® ®
, SIMATIC HMI , SIMATIC NET
®
are trademarks of SIEMENS AG.
® ®
, SIMODRIVE , SIMOTION
Exclusion of Liability
We have conscientiously checked the contents of this manual to en-
sure that they coincide with the hardware and software described.
Since deviations cannot be precluded entirely, we cannot guarantee
complete conformance. However, the data in this manual is reviewed
regularly and any necessary corrections included in subsequent
editions. We are grateful for any recommendations or suggestions.
 Siemens AG 2004
Subject to technical changes without notice.
SINAMICS G List Manual
® ®
, SINAMICS and