Siemens SINAMICS G List Manual page 45

Note: The parameter can only be changed for closed-loop vector control (p0107).
The parameter value is not reset when the factory setting is restored (p0010 = 30, p0970).
p0101[0...15] Drive object numbers / DO numbers
CU Can be changed: C1
Data type: Unsigned16
P-Group: Topology
Min
0
Description: The parameter contains the object number via which every drive object can be addressed.
The number of an existing drive object is entered into each index.
The numbers are automatically assigned once and cannot longer be changed as long as the object has not been
deleted.
In the commissioning software, this object number cannot be entered using the Expert list, but is automatically
assigned when inserting an object.
Note: Value = 0: No drive object is defined.
r0102 Number of drive objects / DO quantity
CU Can be changed: -
Data type: Unsigned16
P-Group: Topology
Min
-
Description: Displays the total number of available drive objects.
Note: The numbers of the drive objects are in p0101.
p0103[0...15] Application-specific view / Appl_spec view
CU Can be changed: C1
Data type: Unsigned16
P-Group: -
Min
0
Description: The application-specific view of an existing drive object is entered into each index.
Dependency: Refer to: r0103, r0107, p0107
Refer to: F01051
Note: The application-specific views are defined in files on the CompactFlash Card with the following structure:
PDxxxyyy.ACX
xxx: Application-specific view, set using p0103
yyy: Type of drive object (p0107)
Example:
PD052011.ACX
--> "011" stands for the drive object, type SERVO
--> "052" is the view for this drive object set using p0103
r0103 Application-specific view / Appl_spec view
VECTOR Can be changed: -
Data type: Unsigned16
P-Group: Control
Min
-
Description: Displays the application-specific view of the individual drive object.
 Siemens AG 2004 All Rights Reserved
SINAMICS G List Manual, Edition 12.2004
Data set: -
Units group: -
Max
62
Data set: -
Units group: -
Max
-
Data set: -
Units group: -
Max
999
Data set: -
Units group: -
Max
-
Parameters
Parameter list
Access level: 2
Function diagram: -
Unit selection: -
Factory setting
0
Access level: 2
Function diagram: -
Unit selection: -
Factory setting
-
Access level: 2
Function diagram: -
Unit selection: -
Factory setting
0
Access level: 2
Function diagram: -
Unit selection: -
Factory setting
-
1-45