Siemens SINAMICS G List Manual page 137

p1008[0...n] CO: Fixed speed setpoint 8 / n_set_fixed 8
VECTOR Can be changed: U, T
Data type: Floating Point
P-Group: Setpoints
Min
-210000.000 [1/min]
Description: Sets a value for the fixed speed / velocity setpoint 8.
Dependency: Refer to: p1020, p1021, p1022, p1023, r1024, r1197
p1009[0...n] CO: Fixed speed setpoint 9 / n_set_fixed 9
VECTOR Can be changed: U, T
Data type: Floating Point
P-Group: Setpoints
Min
-210000.000 [1/min]
Description: Sets a value for the fixed speed / velocity setpoint 9.
Dependency: Refer to: p1020, p1021, p1022, p1023, r1024, r1197
p1010[0...n] CO: Fixed speed setpoint 10 / n_set_fixed 10
VECTOR Can be changed: U, T
Data type: Floating Point
P-Group: Setpoints
Min
-210000.000 [1/min]
Description: Sets a value for the fixed speed / velocity setpoint 10.
Dependency: Refer to: p1020, p1021, p1022, p1023, r1024, r1197
p1011[0...n] CO: Fixed speed setpoint 11 / n_set_fixed 11
VECTOR Can be changed: U, T
Data type: Floating Point
P-Group: Setpoints
Min
-210000.000 [1/min]
Description: Sets a value for the fixed speed / velocity setpoint 11.
Dependency: Refer to: p1020, p1021, p1022, p1023, r1024, r1197
p1012[0...n] CO: Fixed speed setpoint 12 / n_set_fixed 12
VECTOR Can be changed: U, T
Data type: Floating Point
P-Group: Setpoints
Min
-210000.000 [1/min]
Description: Sets a value for the fixed speed / velocity setpoint 12.
Dependency: Refer to: p1020, p1021, p1022, p1023, r1024, r1197
 Siemens AG 2004 All Rights Reserved
SINAMICS G List Manual, Edition 12.2004
Data set: DDS
Units group: SPEED_ROT
Max
210000.000 [1/min]
Data set: DDS
Units group: SPEED_ROT
Max
210000.000 [1/min]
Data set: DDS
Units group: SPEED_ROT
Max
210000.000 [1/min]
Data set: DDS
Units group: SPEED_ROT
Max
210000.000 [1/min]
Data set: DDS
Units group: SPEED_ROT
Max
210000.000 [1/min]
Parameters
Parameter list
Access level: 2
Function diagram: 3010
Unit selection: -
Factory setting
0.000 [1/min]
Access level: 2
Function diagram: 3010
Unit selection: -
Factory setting
0.000 [1/min]
Access level: 2
Function diagram: 3010
Unit selection: -
Factory setting
0.000 [1/min]
Access level: 2
Function diagram: 3010
Unit selection: -
Factory setting
0.000 [1/min]
Access level: 2
Function diagram: 3010
Unit selection: -
Factory setting
0.000 [1/min]
1-137