Siemens SINAMICS G List Manual page 253

p2108 BI: External fault 3 / External fault 3
CU, TB30, TM31 Can be changed: U, T
Data type: Unsigned32
P-Group: Messages
Min
-
Description: Sets the signal source for external fault 3.
Dependency: External fault 3 --> F07862(A)
Refer to: F07862
Note: An external fault is triggered with a 1/0 signal.
p2108[0...n] BI: External fault 3 / External fault 3
VECTOR Can be changed: U, T
Data type: Unsigned32
P-Group: Messages
Min
-
Description: Sets the signal source for external fault 3.
Dependency: External fault 3 --> F07862(A)
Refer to: F07862
Note: An external fault is triggered with a 1/0 signal.
r2109[0...63] Fault time removed in milliseconds / t_flt resolved ms
All objects Can be changed: -
Data type: Unsigned32
P-Group: Messages
Min
- [ms]
Description: Displays the system runtime in milliseconds when the fault was removed.
Dependency: Refer to: r0945, r0947, r0948, r0949, r2114, r2130, r2133, r2136
r2110[0...7] Alarm number / Alarm number
All objects Can be changed: -
Data type: Unsigned16
P-Group: Messages
Min
-
Description: This parameter is identical to r2122.
p2111 Alarm counter / Alarm counter
All objects Can be changed: U, T
Data type: Unsigned16
P-Group: Messages
Min
0
Description: Number of alarms that have occurred after the last reset.
 Siemens AG 2004 All Rights Reserved
SINAMICS G List Manual, Edition 12.2004
Data set: -
Units group: -
Max
-
Data set: CDS
Units group: -
Max
-
Data set: -
Units group: TIME_M3
Max
- [ms]
Data set: -
Units group: -
Max
-
Data set: -
Units group: -
Max
65535
Parameters
Parameter list
Access level: 3
Function diagram: -
Unit selection: -
Factory setting
1
Access level: 3
Function diagram: 2546
Unit selection: -
Factory setting
1
Access level: 3
Function diagram: 1750,
8060
Unit selection: -
Factory setting
- [ms]
Access level: 2
Function diagram: 8065
Unit selection: -
Factory setting
-
Access level: 3
Function diagram: 1750,
8065
Unit selection: -
Factory setting
0
1-253