Siemens SINAMICS G List Manual page 127

r0948[0...63] Fault time received in milliseconds / t_fault recv ms
All objects Can be changed: -
Data type: Unsigned32
P-Group: Messages
Min
- [ms]
Description: Displays the system runtime in milliseconds when the fault occurred.
Dependency: Refer to: r0945, r0947, r0949, r2109, r2114, r2130, r2133, r2136
r0949[0...63] Fault value / Fault value
All objects Can be changed: -
Data type: Integer32
P-Group: Messages
Min
-
Description: Displays additional information about the fault that occurred (as integer number).
Dependency: Refer to: r0945, r0947, r0948, r2109, r2130, r2133, r2136
r0951[0...65534] Fault number list / Fault number list
All objects Can be changed: -
Data type: Unsigned16
P-Group: Messages
Min
-
Description: Lists parameters assigned to a fault.
Dependency: Refer to: r0946
p0952 Fault cases, counter / Fault cases No.
All objects Can be changed: U, T
Data type: Unsigned16
P-Group: Messages
Min
0
Description: Number of fault situations that have occurred since the last reset.
Dependency: The fault buffer is deleted (cleared) by setting p0952 to 0.
Refer to: r0945, r0947, r0948, r0949, r2109, r2130, r2133, r2136
 Siemens AG 2004 All Rights Reserved
SINAMICS G List Manual, Edition 12.2004
Data set: -
Units group: TIME_M3
Max
- [ms]
Data set: -
Units group: -
Max
-
Data set: -
Units group: -
Max
-
Data set: -
Units group: -
Max
65535
Parameters
Parameter list
Access level: 3
Function diagram: 1750,
8060
Unit selection: -
Factory setting
- [ms]
Access level: 3
Function diagram: 1750,
8060
Unit selection: -
Factory setting
-
Access level: 4
Function diagram: 8060
Unit selection: -
Factory setting
-
Access level: 3
Function diagram: 1710,
8060
Unit selection: -
Factory setting
0
1-127