Table of Contents
Advertisement
Faults and Alarms
List of faults and alarms
F08000 (N, A)
TB: +/-15 V power supply faulted
Reaction:
NONE (DCBRAKE, OFF1, OFF2, OFF3, STOP1, STOP2)
Acknowledge:
IMMEDIATELY (power on)
Cause:
Terminal board 30 detects an incorrect internal power supply voltage.
Fault value (r0949, decimal):
0: Error when testing the monitoring circuit.
1: Fault in normal operation.
Remedy:
- replace terminal board 30.
- replace control unit.
Reaction upon N:
NONE
Acknowledge
NONE
upon N:
Reaction upon A:
NONE
Acknowledge
NONE
upon A:
F08010 (N, A)
TB: Analog-digital converter
Reaction:
OFF1 (DCBRAKE, NONE, OFF2, OFF3, STOP1, STOP2)
Acknowledge:
IMMEDIATELY (power on)
Cause:
The analog/digital converter on terminal board 30 has not supplied any converted data.
Remedy:
- check the power supply.
- replace terminal board 30.
Reaction upon N:
NONE
Acknowledge
NONE
upon N:
Reaction upon A:
NONE
Acknowledge
NONE
upon A:
F08500 (A)
COMM BOARD: Monitoring time, configuration expired
Reaction:
OFF1 (OFF2, OFF3)
Acknowledge:
IMMEDIATELY
Cause:
The monitoring time for the configuration has expired.
Fault value (r0949, decimal):
0: The transfer of the send-configuration data has been exceeded (time).
1: The transfer of the receive-configuration data has been exceeded (time).
Remedy:
Check communication line.
Reaction upon A:
NONE
Acknowledge
NONE
upon A:
F08501 (A)
COMM BOARD: Monitoring time, process data expired
Reaction:
OFF1 (OFF2, OFF3)
Acknowledge:
IMMEDIATELY
Cause:
The set monitoring time expired while transferring process data via COMM BOARD.
See also: p2040
Remedy:
- check communications link.
- check the set monitoring time if the error persists.
See also: p2040
Reaction upon A:
NONE
Acknowledge
NONE
upon A:
F08502 (A)
COMM BOARD: Monitoring time, sign-of-life expired
Reaction:
OFF1 (OFF2, OFF3)
Acknowledge:
IMMEDIATELY
3-580
Siemens AG 2004 All Rights Reserved
SINAMICS G List Manual, Edition 12.2004
Hide quick links:
Advertisement
Table of Contents
