Siemens SINAMICS G List Manual page 15

Table 1-1
Drive object (func-
tion module)
CU
CU_S
TB30
TM31
TM41
VECTOR
VECTOR (n/M)
VECTOR (ext.
brake)
VECTOR (parallel)
VECTOR (techn.
ctrl)
VECTOR (ext.
mess.)
Note:
References: /IH1/
Changeable in
The "-" sign indicates that the parameter can be changed in any object state and
that the change will be effective immediately.
The letters "C1, C2, T, U" mean that the parameter can be changed only in the
specified drive object state and that the change will not take effect until the object
switches to another state. This can be one or more states.
 Siemens AG 2004 All Rights Reserved
SINAMICS G List Manual, Edition 12.2004
Data in "Drive object (function module)" field
Control Unit, (all variants)
Control Unit SINAMICS S (SINAMICS S120/S150)
Terminal Board 30
Terminal Module 31
Terminal Module 41
Vector drive
Vector drive with function module "Closed-loop speed/torque con-
trol" (r0108.2)
Vector drive with function module "Extended brake control"
(r0108.14)
Vector drive with function module "Parallel connection" (r0108.15)
Vector drive with function module "Technology controller"
(r0108.16)
Vector drive with function module "Extended reports/monitors"
(r0108.17)
SINAMICS S120 Commissioning Manual
in section "Drive Objects"
Overview of parameters
Meaning
Parameters
1-15