Table of Contents
Advertisement
r0374[0...n]
Motor rotor resistance, cold / Mot R_rotor cold
VECTOR
Can be changed: -
Data type: Floating Point
P-Group: Motor
Min
- [Ohm]
Description:
Displays the rotor/secondary section resistance of the motor for the ambient temperature p0625.
Dependency:
Refer to: p0625
Note:
The parameter is not used for synchronous motors (p0300 = 2xx).
r0376[0...n]
Rated motor rotor resistance / Mot R_rotor rated
VECTOR
Can be changed: -
Data type: Floating Point
P-Group: Motor
Min
- [Ohm]
Description:
Displays the rated (nominal) rotor/secondary section resistance of the motor at the rated temperature (sum of
p0625 and p0628).
Dependency:
Refer to: p0628
Note:
The parameter is not used for synchronous motors (p0300 = 2xx).
r0377[0...n]
Motor leakage inductance, total / Mot L_leak total
VECTOR
Can be changed: -
Data type: Floating Point
P-Group: Motor
Min
- [mH]
Description:
Induction motor:
Displays the stator leakage inductance of the motor including the series inductance (p0353) for servo drives or the
motor reactor (p0233) for vector drives.
Synchronous motor:
Displays the stator quadrature axis inductance including the series inductance (p0353) for servo drives or the motor
reactor (p0233) for vector drives.
r0378[0...n]
Motor stator inductance, d axis / Mot L_stator_d
VECTOR
Can be changed: -
Data type: Floating Point
P-Group: Motor
Min
- [mH]
Description:
Displays the stator direct-axis inductance of the synchronous motor.
r0382[0...n]
Motor main inductance, transformed / Mot L_main trans
VECTOR
Can be changed: -
Data type: Floating Point
P-Group: Motor
Min
- [mH]
Description:
Displays the magnetizing inductance of the motor.
Note:
The parameter is not used for synchronous motors (p0300 = 2xx).
Siemens AG 2004 All Rights Reserved
SINAMICS G List Manual, Edition 12.2004
Data set: MDS
Units group: RESISTANCE
Max
- [Ohm]
Data set: MDS
Units group: RESISTANCE
Max
- [Ohm]
Data set: MDS
Units group: INDUCTANCE_M3
Max
- [mH]
Data set: MDS
Units group: INDUCTANCE_M3
Max
- [mH]
Data set: MDS
Units group: INDUCTANCE_M3
Max
- [mH]
Parameters
Parameter list
Access level: 4
Function diagram: -
Unit selection: -
Factory setting
- [Ohm]
Access level: 4
Function diagram: -
Unit selection: -
Factory setting
- [Ohm]
Access level: 4
Function diagram: 6640
Unit selection: -
Factory setting
- [mH]
Access level: 4
Function diagram: -
Unit selection: -
Factory setting
- [mH]
Access level: 4
Function diagram: -
Unit selection: -
Factory setting
- [mH]
1-81
Hide quick links:
Advertisement
Table of Contents
