Siemens SINAMICS G List Manual page 30

Parameters
Parameter list
r0027 Absolute actual current, smoothed / I_act abs.val.smth
VECTOR Can be changed: -
Data type: Floating Point
P-Group: Displays, signals
Min
- [Aeff]
Description: Displays the smoothed absolute actual current value.
Dependency: Refer to: r0068
Note: A_INF, VECTOR: Smoothing time constant = 300 ms
SERVO: Smoothing time constant = 100 ms
The signal is not suitable as process quantity and may only be used as display quantity.
The absolute current actual value is available smoothed (r0027) and unsmoothed (r0068).
r0028 Modulation depth, smoothed / Modulat depth smth
VECTOR Can be changed: -
Data type: Floating Point
P-Group: Displays, signals
Min
- [%]
Description: Displays the smoothed actual value of the modulation depth.
Dependency: Refer to: r0074
Note: A_INF: Smoothing time constant = 300 ms
SERVO, VECTOR: Smoothing time constant = 100 ms
The signal is not suitable as process quantity and may only be used as display quantity.
The modulation depth is available smoothed (r0028) and unsmoothed (r0074).
r0029 Drive, smoothed field-generating current actual value / Drv Id_act smooth
VECTOR Can be changed: -
Data type: Floating Point
P-Group: Displays, signals
Min
- [Aeff]
Description: Displays the smoothed field-generating actual current.
Dependency: Refer to: r0076
Note: SERVO: Smoothing time constant = 100 ms
VECTOR: Smoothing time constant = 300 ms
The signal is not suitable as process quantity and may only be used as display quantity.
The field-generating current actual value is available smoothed (r0029) and unsmoothed (r0076).
r0030 Current actual value, torque-generating, smoothed / Iq_act smooth
VECTOR Can be changed: -
Data type: Floating Point
P-Group: Displays, signals
Min
- [Aeff]
Description: Displays the smoothed torque-generating actual current.
Dependency: Refer to: r0078
1-30
Data set: -
Units group: CURRENT_AC_EFF Unit selection: -
Max
- [Aeff]
Data set: -
Units group: PERCENT
Max
- [%]
Data set: -
Units group: CURRENT_AC_EFF Unit selection: -
Max
- [Aeff]
Data set: -
Units group: CURRENT_AC_EFF Unit selection: -
Max
- [Aeff]
 Siemens AG 2004 All Rights Reserved
SINAMICS G List Manual, Edition 12.2004
Access level: 2
Function diagram: 5730,
6714, 8950
Factory setting
- [Aeff]
Access level: 3
Function diagram: 5730,
8940, 8950
Unit selection: -
Factory setting
- [%]
Access level: 3
Function diagram: 5730
Factory setting
- [Aeff]
Access level: 3
Function diagram: 5730
Factory setting
- [Aeff]