Table of Contents
Advertisement
Parameters
Parameter list
r8571[0...9]
Existing macros to trigger parameter p0700 / existMacros_p700
VECTOR
Can be changed: -
Data type: Unsigned32
P-Group: -
Min
-
Description:
Contains the macros that are available on this drive object for the macro trigger parameter p0700.
Dependency:
Refer to: p0700
r8572[0...9]
Existing macros to the trigger parameter p1000 / existMacros_p1000
VECTOR
Can be changed: -
Data type: Unsigned32
P-Group: -
Min
-
Description:
Contains the macros that are available on this drive object for the macro trigger parameter p1000.
Dependency:
Refer to: p1000
r8573[0...9]
Existing macros to the trigger parameter p1500 / existMacros_p1500
VECTOR
Can be changed: -
Data type: Unsigned32
P-Group: -
Min
-
Description:
Contains the macros that are available on this drive object for the macro trigger parameter p1500.
Dependency:
Refer to: p1500
1-338
Data set: -
Units group: -
Max
-
Data set: -
Units group: -
Max
-
Data set: -
Units group: -
Max
-
Siemens AG 2004 All Rights Reserved
SINAMICS G List Manual, Edition 12.2004
Access level: 3
Function diagram: -
Unit selection: -
Factory setting
-
Access level: 3
Function diagram: -
Unit selection: -
Factory setting
-
Access level: 3
Function diagram: -
Unit selection: -
Factory setting
-
Hide quick links:
Advertisement
Table of Contents
