Siemens SINAMICS G List Manual page 53

p0144[0...n] Sensor module detection via LED / SM detection LED
VECTOR Can be changed: U, T
Data type: Unsigned8
P-Group: Encoder
Min
0
Description: Detects the sensor module assigned to this drive and data set.
Note: While p0144 = 1, the READY LED flashes green/orange or red/orange with 2 Hz at the appropriate sensor module.
r0147[0...n] Sensor module version EPROM data / SM Eep_version
VECTOR Can be changed: -
Data type: Unsigned32
P-Group: Encoder
Min
-
Description: Displays the version of the EPROM data of the sensor module.
Dependency: Refer to: r0127, r0157
r0148[0...n] Sensor module firmware version / SM FW_version
VECTOR Can be changed: -
Data type: Unsigned32
P-Group: Encoder
Min
-
Description: Displays the sensor module firmware version.
Dependency: Refer to: r0018, r0128, r0158, r0197, r0198
Note: Example:
The value 1010100 should be interpreted as V01.01.01.00.
p0151 Terminal module component number / TM comp_no
TM31 Can be changed: C1
Data type: Unsigned8
P-Group: Data sets
Min
0
Description: Sets the component number for the terminal module.
This unique component number is assigned when parameterizing the topology.
Only component numbers can be entered into this parameter that correspond to a terminal module.
p0154 Terminal module detection via LED / TM detection LED
TM31 Can be changed: U, T
Data type: Unsigned8
P-Group: Terminals
Min
0
Description: Detects the terminal module assigned to this drive and data set.
Note: While p0154 = 1, the READY LED flashes green/orange or red/orange with 2 Hz at the appropriate terminal mod-
ule.
 Siemens AG 2004 All Rights Reserved
SINAMICS G List Manual, Edition 12.2004
Data set: EDS
Units group: -
Max
1
Data set: EDS
Units group: -
Max
-
Data set: EDS
Units group: -
Max
-
Data set: -
Units group: -
Max
199
Data set: -
Units group: -
Max
1
Parameters
Parameter list
Access level: 2
Function diagram: -
Unit selection: -
Factory setting
0
Access level: 3
Function diagram: -
Unit selection: -
Factory setting
-
Access level: 3
Function diagram: -
Unit selection: -
Factory setting
-
Access level: 4
Function diagram: 9550,
9552
Unit selection: -
Factory setting
0
Access level: 2
Function diagram: -
Unit selection: -
Factory setting
0
1-53