Siemens SINAMICS G List Manual page 6

Preface
You can obtain detailed information about the documents named in the documen-
tation overview and other documents available for SINAMICS from your local Sie-
mens office.
In the interests of clarity, this documentation does not contain all the detailed
information for all product types and cannot take into account every possible
aspect of installation, operation, or maintenance.
The contents of this documentation are not part of an earlier or existing agree-
ment, a promise, or a legal agreement, nor do they change this. All obligations
entered into by Siemens result from the respective contract of sale that contains
the complete and sole valid warranty arrangements. These contractual warranty
provisions are neither extended nor curbed as a result of the statements made in
this documentation.
Audience
This documentation is aimed at machine manufacturers, commissioning engi-
neers, and service personnel who use SINAMICS.
Objective
This manual contains the comprehensive information about parameters, function
diagrams and faults and alarms required to commission and service the system.
It must be used as a supplementary document to the other manuals and tools
available for the product.
Finding Your Way Around
The following guides are provided to help you locate information in this manual:
1. Table of contents
− General table of contents for complete manual (after the preface).
− Table of contents for function diagrams (Section 2.1).
2. List of Abbreviations
3. References
4. IndexGlossary
Preface-6
 Siemens AG 2004 All Rights Reserved
SINAMICS G List Manual, Edition 12.2004