Siemens SINAMICS G List Manual page 327

r7231[0...n] Parallel circuit configuration, phase voltage, actual value phase U / U_phase U act val
VECTOR (Parallel) Can be changed: -
Data type: Floating Point
P-Group: Displays, signals
Min
- [V]
Description: Displays the actual voltage, phase U.
The average value of all power modules is displayed in r0089[0].
r7232[0...n] Parallel circuit configuration, phase voltage, actual value phase V / U_phase V act val
VECTOR (Parallel) Can be changed: -
Data type: Floating Point
P-Group: Displays, signals
Min
- [V]
Description: Displays the actual voltage, phase V.
The average value of all power modules is displayed in r0089[1].
r7233[0...n] Parallel circuit configuration, phase voltage, actual value phase W / U_phase W act
val
VECTOR (Parallel) Can be changed: -
Data type: Floating Point
P-Group: Displays, signals
Min
- [V]
Description: Displays the actual voltage, phase W.
The average value of all power modules is displayed in r0089[2].
r7250[0...4] Parallel circuit configuration, rated power module power rating / PM P_rated
VECTOR (Parallel) Can be changed: -
Data type: Floating Point
P-Group: Drive converter
Min
- [kW]
Description: Displays the rated power of the individual power modules connected in parallel for various load duty cycles.
The sum of the rated powers of all power modules connected in parallel is displayed in r0206.
Index: [0] = Rating plate
[1] = Load duty cycle with high overload condition
[2] = Load duty cycle with slight overload condition
[3] = S1 load duty cycle
[4] = S6 load duty cycle
Dependency: The value is displayed in [kW] or [hp].
Refer to: p0100, p0205
 Siemens AG 2004 All Rights Reserved
SINAMICS G List Manual, Edition 12.2004
Data set: PDS
Units group: VOLTAGE_AC_PP
Max
- [V]
Data set: PDS
Units group: VOLTAGE_AC_PP
Max
- [V]
Data set: PDS
Units group: VOLTAGE_AC_PP
Max
- [V]
Data set: -
Units group: POWER_P3
Max
- [kW]
Parameters
Parameter list
Access level: 3
Function diagram: -
Unit selection: -
Factory setting
- [V]
Access level: 3
Function diagram: -
Unit selection: -
Factory setting
- [V]
Access level: 3
Function diagram: -
Unit selection: -
Factory setting
- [V]
Access level: 2
Function diagram: -
Unit selection: p0100
Factory setting
- [kW]
1-327