Siemens SINAMICS G List Manual page 136

Parameters
Parameter list
p1003[0...n] CO: Fixed speed setpoint 3 / n_set_fixed 3
VECTOR Can be changed: U, T
Data type: Floating Point
P-Group: Setpoints
Min
-210000.000 [1/min]
Description: Sets a value for the fixed speed / velocity setpoint 3.
Dependency: Refer to: p1020, p1021, p1022, p1023, r1024, r1197
p1004[0...n] CO: Fixed speed setpoint 4 / n_set_fixed 4
VECTOR Can be changed: U, T
Data type: Floating Point
P-Group: Setpoints
Min
-210000.000 [1/min]
Description: Sets a value for the fixed speed / velocity setpoint 4.
Dependency: Refer to: p1020, p1021, p1022, p1023, r1024, r1197
p1005[0...n] CO: Fixed speed setpoint 5 / n_set_fixed 5
VECTOR Can be changed: U, T
Data type: Floating Point
P-Group: Setpoints
Min
-210000.000 [1/min]
Description: Sets a value for the fixed speed / velocity setpoint 5.
Dependency: Refer to: p1020, p1021, p1022, p1023, r1024, r1197
p1006[0...n] CO: Fixed speed setpoint 6 / n_set_fixed 6
VECTOR Can be changed: U, T
Data type: Floating Point
P-Group: Setpoints
Min
-210000.000 [1/min]
Description: Sets a value for the fixed speed / velocity setpoint 6.
Dependency: Refer to: p1020, p1021, p1022, p1023, r1024, r1197
p1007[0...n] CO: Fixed speed setpoint 7 / n_set_fixed 7
VECTOR Can be changed: U, T
Data type: Floating Point
P-Group: Setpoints
Min
-210000.000 [1/min]
Description: Sets a value for the fixed speed / velocity setpoint 7.
Dependency: Refer to: p1020, p1021, p1022, p1023, r1024, r1197
1-136
Data set: DDS
Units group: SPEED_ROT
Max
210000.000 [1/min]
Data set: DDS
Units group: SPEED_ROT
Max
210000.000 [1/min]
Data set: DDS
Units group: SPEED_ROT
Max
210000.000 [1/min]
Data set: DDS
Units group: SPEED_ROT
Max
210000.000 [1/min]
Data set: DDS
Units group: SPEED_ROT
Max
210000.000 [1/min]
 Siemens AG 2004 All Rights Reserved
SINAMICS G List Manual, Edition 12.2004
Access level: 2
Function diagram: 3010
Unit selection: -
Factory setting
0.000 [1/min]
Access level: 2
Function diagram: 3010
Unit selection: -
Factory setting
0.000 [1/min]
Access level: 2
Function diagram: 3010
Unit selection: -
Factory setting
0.000 [1/min]
Access level: 2
Function diagram: 3010
Unit selection: -
Factory setting
0.000 [1/min]
Access level: 2
Function diagram: 3010
Unit selection: -
Factory setting
0.000 [1/min]