Siemens SINAMICS G List Manual page 89

Dependency: Refer to: p0440, p0441, p0442, p0444, p0445, r0460, r0461, r0462, r0463, r0464
Refer to: F07414
p0444[0...n] Encoder commissioning serial number part 4 / Enc comm ser_no 4
VECTOR Can be changed: C2
Data type: Unsigned32
P-Group: Encoder
Min
0000 hex
Description: Serial number part 4 of the encoder for the commissioning.
Dependency: Refer to: p0440, p0441, p0442, p0443, p0445, r0460, r0461, r0462, r0463, r0464
Refer to: F07414
p0445[0...n] Encoder commissioning serial number part 5 / Enc comm ser_no 5
VECTOR Can be changed: C2
Data type: Unsigned32
P-Group: Encoder
Min
0000 hex
Description: Serial number part 5 of the encoder for the commissioning.
Dependency: Refer to: p0440, p0441, p0442, p0443, p0444, r0460, r0461, r0462, r0463, r0464
Refer to: F07414
r0451[0...2] Commutation angle factor / Enc commut_factor
VECTOR Can be changed: -
Data type: Unsigned16
P-Group: Encoder
Min
-
Description: Displays the relationship between the electrical and mechanical rotor positions.
Index: [0] = Encoder 1
[1] = Encoder 2
[2] = Encoder 3
r0455[0...2] Encoder configuration recognized / Enc config act
VECTOR Can be changed: -
Data type: Unsigned32
P-Group: Encoder
Min
-
Description: Displays the detected encoder configuration.
In this case, the encoder must automatically support the function (e.g. encoder with EnDat interface).
Index: [0] = Encoder 1
[1] = Encoder 2
[2] = Encoder 3
 Siemens AG 2004 All Rights Reserved
SINAMICS G List Manual, Edition 12.2004
Data set: EDS
Units group: -
Max
FFFF FFFF hex
Data set: EDS
Units group: -
Max
FFFF FFFF hex
Data set: -
Units group: -
Max
-
Data set: -
Units group: -
Max
-
Parameters
Parameter list
Access level: 4
Function diagram: -
Unit selection: -
Factory setting
0000 hex
Access level: 4
Function diagram: -
Unit selection: -
Factory setting
0000 hex
Access level: 3
Function diagram: 4710
Unit selection: -
Factory setting
-
Access level: 3
Function diagram: -
Unit selection: -
Factory setting
-
1-89