Table of Contents
Advertisement
r2224
CO: Technology controller, fixed value effective / Tec_ctr FixVal eff
VECTOR (Tech ctrl) Can be changed: -
Data type: Floating Point
P-Group: Technology
Min
- [%]
Description:
Displays the selected and effective fixed value of the technology controller.
Dependency:
Refer to: r2229
r2229
Technology controller current number / Tec_ctrl No. act
VECTOR (Tech ctrl) Can be changed: -
Data type: Unsigned32
P-Group: Technology
Min
-
Description:
Displays the number of the selected fixed setpoint of the technology controller.
Dependency:
Refer to: r2224
p2230[0...n]
Technology controller motorized potentiometer configuration / Tec_ctr mop config
VECTOR (Tech ctrl) Can be changed: U, T
Data type: Unsigned32
P-Group: Technology
Min
0000 bin
Description:
Sets the configuration for the motorized potentiometer of the technology controller.
Bit field:
Bit
Signal name
00
Data save active
02
Initial rounding-off active
Dependency:
Refer to: r2231, p2240
Note:
Re bit 00:
0: The setpoint for the motorized potentiometer is not saved and after ON is entered using p2240.
1: The setpoint for the motorized potentiometer is saved and after ON is entered using p2231.
Re bit 02:
0: Without initial rounding-off
1: With initial rounding-off. The selected ramp-up/down time is correspondingly exceeded.
r2231
Technology controller motorized potentiometer setpoint memory / Tec_ctrl mop
mem
VECTOR (Tech ctrl) Can be changed: -
Data type: Floating Point
P-Group: Technology
Min
- [%]
Description:
Displays the setpoint memory for the motorized potentiometer of the technology controller.
For p2230.0 = 1, the last setpoint that was saved is entered after ON.
Dependency:
Refer to: p2230
Siemens AG 2004 All Rights Reserved
SINAMICS G List Manual, Edition 12.2004
Data set: -
Units group: PERCENT
Max
- [%]
Data set: -
Units group: -
Max
-
Data set: DDS
Units group: -
Max
0111 bin
0 signal
No
No
Data set: -
Units group: PERCENT
Max
- [%]
Parameters
Parameter list
Access level: 2
Function diagram: 7950
Unit selection: -
Factory setting
- [%]
Access level: 2
Function diagram: 7950
Unit selection: -
Factory setting
-
Access level: 3
Function diagram: 7954
Unit selection: -
Factory setting
0110 bin
1 signal
FP
Yes
-
Yes
-
Access level: 2
Function diagram: 7954
Unit selection: -
Factory setting
- [%]
1-275
Hide quick links:
Advertisement
Table of Contents
