Table of Contents
Advertisement
Parameters
Parameter list
r2294
CO: Technology controller output signal / Tec_ctr outp_sig
VECTOR (Tech ctrl) Can be changed: -
Data type: Floating Point
P-Group: Technology
Min
- [%]
Description:
Displays the output signal of the technology controller.
Dependency:
Refer to: p2295
p2295
Technology controller output scaling / Tec_ctr outp scal
VECTOR (Tech ctrl) Can be changed: U, T
Data type: Floating Point
P-Group: Technology
Min
-100.00 [%]
Description:
Sets the scaling for the output signal of the technology controller.
r2349
CO/BO: Technology controller status word / Tec_ctr stat word
VECTOR (Tech ctrl) Can be changed: -
Data type: Unsigned32
P-Group: Technology
Min
-
Description:
Displays the status word of the technology controller.
Bit field:
Bit
Signal name
00
Technology controller de-activated
01
Technology controller limited
p2900[0...n]
CO: Fixed value 1 [%] / Fixed value 1 [%]
VECTOR
Can be changed: U, T
Data type: Floating Point
P-Group: Free function blocks
Min
-10000.00 [%]
Description:
Sets a fixed percentage.
Dependency:
Refer to: p2901, p2930
Note:
The value can be used to interconnect a scaling function (e.g. scaling of the main setpoint)
p2901[0...n]
CO: Fixed value 2 [%] / Fixed value 2 [%]
VECTOR
Can be changed: U, T
Data type: Floating Point
P-Group: Free function blocks
Min
-10000.00 [%]
Description:
Sets a fixed percentage.
Dependency:
Refer to: p2900, p2930
Note:
The value can be used to interconnect a scaling function (e.g. scaling of the supplementary setpoint)
1-282
Data set: -
Units group: PERCENT
Max
- [%]
Data set: -
Units group: PERCENT
Max
100.00 [%]
Data set: -
Units group: -
Max
-
0 signal
No
No
Data set: DDS
Units group: PERCENT
Max
10000.00 [%]
Data set: DDS
Units group: PERCENT
Max
10000.00 [%]
Siemens AG 2004 All Rights Reserved
SINAMICS G List Manual, Edition 12.2004
Access level: 2
Function diagram: 7958
Unit selection: -
Factory setting
- [%]
Access level: 3
Function diagram: 7958
Unit selection: -
Factory setting
100.00 [%]
Access level: 3
Function diagram: 7958
Unit selection: -
Factory setting
-
1 signal
FP
Yes
-
Yes
-
Access level: 3
Function diagram: 3030
Unit selection: -
Factory setting
0.00 [%]
Access level: 3
Function diagram: 3030
Unit selection: -
Factory setting
0.00 [%]
Hide quick links:
Advertisement
Table of Contents
