Table of Contents
Advertisement
r2245
CO: Technology controller motorized potentiometer setpoint before RFG / Tec_ctr
mop b. RFG
VECTOR (Tech ctrl) Can be changed: -
Data type: Floating Point
P-Group: Technology
Min
- [%]
Description:
Sets the effective setpoint in front of the internal motorized potentiometer ramp-function generator of the technology
controller.
Dependency:
Refer to: r2250
p2247[0...n]
Technology controller motorized potentiometer ramp-up time / Tec_ctr mop t_r-up
VECTOR (Tech ctrl) Can be changed: U, T
Data type: Floating Point
P-Group: Technology
Min
0.0 [s]
Description:
Sets the ramp-up time for the internal ramp-function generator for the motorized potentiometer of the technology
controller.
Dependency:
Refer to: p2248
Note:
The time is referred to 100 %.
When the initial rounding-off is activated (p2230.2 = 1) the ramp-up is correspondingly extended.
p2248[0...n]
Technology controller motorized potentiometer ramp-down time / Tec_ctrMop
t_rdown
VECTOR (Tech ctrl) Can be changed: U, T
Data type: Floating Point
P-Group: Technology
Min
0.0 [s]
Description:
Sets the ramp-down time for the internal ramp-function generator for the motorized potentiometer of the technology
controller.
Dependency:
Refer to: p2247
Note:
The time is referred to 100 %.
When the initial rounding-off is activated (p1030.2) the ramp-down is correspondingly extended.
r2250
CO: Technology controller motorized potentiometer setpoint after RFG / Tec_ctr mop
a. RFG
VECTOR (Tech ctrl) Can be changed: -
Data type: Floating Point
P-Group: Technology
Min
- [%]
Description:
Displays the effective setpoint after the internal ramp-function generator for the motorized potentiometer of the
technology controller.
Dependency:
Refer to: r2245
Siemens AG 2004 All Rights Reserved
SINAMICS G List Manual, Edition 12.2004
Data set: -
Units group: PERCENT
Max
- [%]
Data set: DDS
Units group: TIME
Max
1000.0 [s]
Data set: DDS
Units group: TIME
Max
1000.0 [s]
Data set: -
Units group: PERCENT
Max
- [%]
Parameters
Parameter list
Access level: 2
Function diagram: 7954
Unit selection: -
Factory setting
- [%]
Access level: 2
Function diagram: 7954
Unit selection: -
Factory setting
10.0 [s]
Access level: 2
Function diagram: 7954
Unit selection: -
Factory setting
10.0 [s]
Access level: 2
Function diagram: 7954
Unit selection: -
Factory setting
- [%]
1-277
Hide quick links:
Advertisement
Table of Contents
