Siemens SINAMICS G List Manual page 54

Parameters
Parameter list
r0157 Terminal module version EPROM data / TM Eep_version
TM31 Can be changed: -
Data type: Unsigned32
P-Group: Terminals
Min
-
Description: Displays the version of the EPROM data of the terminal module.
Dependency: Refer to: r0127, r0147
r0158 Terminal module firmware version / TM FW_version
TM31 Can be changed: -
Data type: Unsigned32
P-Group: Terminals
Min
-
Description: Displays the terminal module firmware version.
Dependency: Refer to: r0018, r0128, r0148, r0197, r0198
Note: Example:
The value 1010100 should be interpreted as V01.01.01.00.
p0161 Option board, component number / OptBoard comp_no
TB30 Can be changed: C1
Data type: Unsigned8
P-Group: Data sets
Min
0
Description: Sets the component number for the option board (e.g. terminal board 30).
This unique component number is assigned when parameterizing the topology.
Only component numbers can be entered into this parameter that correspond to an option board.
p0170 Command Data Set (CDS) number / CDS quantity
VECTOR Can be changed: C1
Data type: Unsigned8
P-Group: Commands
Min
1
Description: Sets the number of command data sets (CDS).
Note: It is possible to toggle between command parameters (BICO parameters) using this data set changeover.
p0180 Drive Data Set (DDS) number / DDS quantity
VECTOR Can be changed: C1
Data type: Unsigned8
P-Group: Data sets
Min
1
Description: Sets the number of drive data sets (DDS).
Note: It is possible to toggle between open-loop and closed-loop control parameters using this data set changeover.
1-54
Data set: -
Units group: -
Max
-
Data set: -
Units group: -
Max
-
Data set: -
Units group: -
Max
199
Data set: -
Units group: -
Max
2
Data set: -
Units group: -
Max
32
 Siemens AG 2004 All Rights Reserved
SINAMICS G List Manual, Edition 12.2004
Access level: 3
Function diagram: -
Unit selection: -
Factory setting
-
Access level: 3
Function diagram: -
Unit selection: -
Factory setting
-
Access level: 4
Function diagram: 9100
Unit selection: -
Factory setting
0
Access level: 2
Function diagram: -
Unit selection: -
Factory setting
1
Access level: 2
Function diagram: 8565
Unit selection: -
Factory setting
1