Siemens SINAMICS G List Manual page 14

Parameters
Overview of parameters
BICO: Full parameter name / Abbreviated name
Some parameters have the following abbreviations in front of their name:
• BI:
• BO:
• CI:
• CO:
• CO/BO: Connector/binector output
Drive object (function module)
A drive object (DO) is an independent, "self-contained" functional unit which pos-
sesses its own parameters and, in some cases, faults and warnings. Further func-
tions and their parameters can be selected or deselected through appropriate
activation of function modules at the commissioning stage.
The parameter list specifies the associated drive object and function module for
each individual parameter.
Examples:
• p1070 CI: Main setpoint
SERVO (setp.), VECTOR
The parameter is available in association with drive object VECTOR irrespec-
tive of activated function modules.
• p1055 BI: Jog bit 0
VECTOR
The parameter is available in association with drive object VECTOR irrespec-
tive of activated function modules, i.e. it is available with every activated func-
tion module belonging to the drive object.
Each parameter can belong to either one, several or all drive objects.
The following information relating to "Drive object" and "Function module" can be
displayed under the parameter number:
1-14
Binector input
This parameter selects the source of a digital signal.
Binector output
This parameter is available as a digital signal for interconnection
with other parameters.
Connector input
This parameter selects the source of an "analog" signal.
Connector output
This parameter is available as an "analog" signal for interconnec-
tion with other parameters.
This parameter is available as an "analog" and digital signal for
interconnection with other parameters.
 Siemens AG 2004 All Rights Reserved
SINAMICS G List Manual, Edition 12.2004