Siemens SINAMICS G List Manual page 313

Values: 1:
2:
3:
4:
5:
p4821 Function generator period / FG period duration
CU Can be changed: U, T
Data type: Floating Point
P-Group: Trace and function generator
Min
0.00 [ms]
Description: Sets the period of the signal to be generated for the function generator.
Dependency: Ineffective when p4820 = 4 (PRBS).
p4822 Function generator pulse width / FG pulse width
CU Can be changed: U, T
Data type: Floating Point
P-Group: Trace and function generator
Min
0.00 [ms]
Description: Sets the pulse width for the signal to be generated for the function generator.
Dependency: Only effective when p4820 = 1 (square-wave).
p4823 Function generator bandwidth / FG bandwith
CU Can be changed: U, T
Data type: Floating Point
P-Group: Trace and function generator
Min
0.00 [Hz]
Description: Sets the bandwidth for the signal to be generated for the function generator.
Dependency: Only effective when p4820 = 4 (PRBS).
Refer to: p4830
Refer to: A02041
p4824 Function generator amplitude / FG amplitude
CU Can be changed: U, T
Data type: Floating Point
P-Group: Trace and function generator
Min
-1600.00 [%]
Description: Sets the amplitude for the signal to be generated for the function generator.
Dependency: Units are dependent on p4810.
If p4810 = 1, 2, 4: the amplitude is referred to p2002 (rated motor current).
If p4810 = 3, 5: the amplitude is referred to p2000 (rated motor speed).
 Siemens AG 2004 All Rights Reserved
SINAMICS G List Manual, Edition 12.2004
Square-wave
Staircase
Triangular
Binary noise - PRBS (Pseudo Random Binary Signal)
Sinusoidal
Data set: -
Units group: TIME_M3
Max
60000.00 [ms]
Data set: -
Units group: TIME_M3
Max
60000.00 [ms]
Data set: -
Units group: FREQUENCY
Max
16000.00 [Hz]
Data set: -
Units group: PERCENT
Max
1600.00 [%]
Parameters
Parameter list
Access level: 3
Function diagram: -
Unit selection: -
Factory setting
1000.00 [ms]
Access level: 3
Function diagram: -
Unit selection: -
Factory setting
500.00 [ms]
Access level: 3
Function diagram: -
Unit selection: -
Factory setting
4000.00 [Hz]
Access level: 3
Function diagram: -
Unit selection: -
Factory setting
5.00 [%]
1-313