Siemens SINAMICS G List Manual page 208

Parameters
Parameter list
Note: This parameter is ineffective for sensorless vector control. In this case, p1727 is always used.
p1727[0...n] Quadrature arm decoupling at voltage limit, scaling / TrnsvDecplVmaxScal
VECTOR (n/M) Can be changed: U, T
Data type: Floating Point
P-Group: Control
Min
0.0 [%]
Description: Sets the the scaling of quadrature arm decoupling when the voltage limit is reached.
r1728 Decoupling voltage / U_Decoupling
VECTOR (n/M) Can be changed: -
Data type: Floating Point
P-Group: Control
Min
- [Veff]
Description: Displays the actual output of the quadrature channel de-coupling for the d axis.
r1729 Decoupling voltage / U_Decoupling
VECTOR (n/M) Can be changed: -
Data type: Floating Point
P-Group: Control
Min
- [Veff]
Description: Displays the actual output of the quadrature channel de-coupling for the q axis.
r1732 Direct-axis voltage setpoint / U_direct-axis_set
VECTOR (n/M) Can be changed: -
Data type: Floating Point
P-Group: Control
Min
- [Veff]
Description: Displays the direct-axis voltage setpoint Ud.
r1733 Quadrature-axis voltage setpoint / U_quad_set
VECTOR (n/M) Can be changed: -
Data type: Floating Point
P-Group: Control
Min
- [Veff]
Description: Displays the quadrature-axis component of voltage setpoint Uq.
1-208
Data set: DDS
Units group: PERCENT
Max
200.0 [%]
Data set: -
Units group: VOLTAGE_AC_EFF Unit selection: -
Max
- [Veff]
Data set: -
Units group: VOLTAGE_AC_EFF Unit selection: -
Max
- [Veff]
Data set: -
Units group: VOLTAGE_AC_EFF Unit selection: -
Max
- [Veff]
Data set: -
Units group: VOLTAGE_AC_EFF Unit selection: -
Max
- [Veff]
 Siemens AG 2004 All Rights Reserved
SINAMICS G List Manual, Edition 12.2004
Access level: 4
Function diagram: -
Unit selection: -
Factory setting
50.0 [%]
Access level: 3
Function diagram: -
Factory setting
- [Veff]
Access level: 3
Function diagram: -
Factory setting
- [Veff]
Access level: 3
Function diagram: 1630,
5714, 5730, 6714
Factory setting
- [Veff]
Access level: 3
Function diagram: 1630,
5714, 5730, 6714, 6731
Factory setting
- [Veff]