Siemens SINAMICS G List Manual page 312

Parameters
Parameter list
p4812 Function generator physical address / FG phys address
CU Can be changed: U, T
Data type: Unsigned32
P-Group: Trace and function generator
Min
0
Description: Sets the physical address where the function generator is to be connected.
Dependency: Only effective when p4810 = 99.
p4813 Function generator physical address reference value / FG phys addr ref
CU Can be changed: U, T
Data type: Floating Point
P-Group: Trace and function generator
Min
1.00
Description: Sets the reference value for 100 % for referred inputs.
Dependency: Only effective when p4810 = 99.
p4815[0...1] Function generator drive number / FG drive number
CU Can be changed: U, T
Data type: Unsigned16
P-Group: Trace and function generator
Min
0
Description: Selects the required drive where the function generator is to be connected.
Only one SERVO type drive can be selected.
Index: [0] = First drive for connection
[1] = Second drive for connection
Dependency: Only effective when p4810 = 1, 2, 3, 4 or 5.
r4818 CO: Function generator output signal / FG output signal
CU Can be changed: -
Data type: Floating Point
P-Group: Trace and function generator
Min
- [%]
Description: Displays the output signal for the function generator.
Dependency: Refer to: p4810
Note: The value is displayed independently of the function generator mode.
The signal is available as connector output for an ongoing interconnection.
p4820 Function generator signal shape / FG signal shape
CU Can be changed: U, T
Data type: Integer16
P-Group: Trace and function generator
Min
1
Description: Sets the signal to be generated for the function generator.
1-312
Data set: -
Units group: -
Max
4294967295
Data set: -
Units group: -
Max
1000000.00
Data set: -
Units group: -
Max
65535
Data set: -
Units group: PERCENT
Max
- [%]
Data set: -
Units group: -
Max
5
 Siemens AG 2004 All Rights Reserved
SINAMICS G List Manual, Edition 12.2004
Access level: 3
Function diagram: -
Unit selection: -
Factory setting
0
Access level: 3
Function diagram: -
Unit selection: -
Factory setting
1.00
Access level: 3
Function diagram: -
Unit selection: -
Factory setting
0
Access level: 3
Function diagram: -
Unit selection: -
Factory setting
- [%]
Access level: 3
Function diagram: -
Unit selection: -
Factory setting
1