Table of Contents
Advertisement
Parameters
Parameter list
p9762
SI password new / SI password new
VECTOR
Can be changed: C2
Data type: Unsigned32
P-Group: Safety Integrated
Min
0000 hex
Description:
Enters a new Safety Integrated password.
Dependency:
A change made to the Safety Integrated password must be acknowledged in the following parameter:
Refer to: p9763
p9763
SI password acknowledgment / SI ackn password
VECTOR
Can be changed: C2
Data type: Unsigned32
P-Group: Safety Integrated
Min
0000 hex
Description:
Acknowledges the new Safety Integrated password.
Dependency:
Refer to: p9762
Note:
The new password entered into p9762 must be re-entered in order to acknowledge.
p9762 and p9763 are automatically set to 0 after the new Safety Integrated password has been successfully
acknowledged.
r9770[0...2]
SI version (control unit) / SI version CU
VECTOR
Can be changed: -
Data type: Unsigned16
P-Group: Safety Integrated
Min
-
Description:
Displays the Safety Integrated version on the control unit.
Index:
[0] = Safety Version (major release)
[1] = Safety Version (minor release)
[2] = Safety Version (baselevel or patch)
Dependency:
Refer to: r9870
Note:
Example:
r9770[0] = 2, r9770[1] = 1, r9770[2] = 1 --> Safety version V02.01.01
r9771
SI common functions (control unit) / SI common fct CU
VECTOR
Can be changed: -
Data type: Unsigned32
P-Group: Safety Integrated
Min
-
Description:
Displays the safety integrated monitoring functions supported on the control unit and motor module.
The control unit determines this display.
Bit field:
Bit
Signal name
00
SH supported via terminal
01
SBC supported
Dependency:
Refer to: r9871
1-350
Data set: -
Units group: -
Max
FFFF FFFF hex
Data set: -
Units group: -
Max
FFFF FFFF hex
Data set: -
Units group: -
Max
-
Data set: -
Units group: -
Max
-
0 signal
No
No
Siemens AG 2004 All Rights Reserved
SINAMICS G List Manual, Edition 12.2004
Access level: 3
Function diagram: 2800
Unit selection: -
Factory setting
0000 hex
Access level: 3
Function diagram: 2800
Unit selection: -
Factory setting
0000 hex
Access level: 3
Function diagram: 2802
Unit selection: -
Factory setting
-
Access level: 3
Function diagram: 2804
Unit selection: -
Factory setting
-
1 signal
FP
Yes
-
Yes
-
Hide quick links:
Advertisement
Table of Contents
