Table of Contents
Advertisement
Parameters
Parameter list
p2106
BI: External fault 1 / External fault 1
CU, TB30, TM31
Can be changed: U, T
Data type: Unsigned32
P-Group: Messages
Min
-
Description:
Sets the signal source for external fault 1.
Dependency:
External fault 1 --> F07860(A)
Refer to: F07860
Note:
An external fault is triggered with a 1/0 signal.
p2106[0...n]
BI: External fault 1 / External fault 1
VECTOR
Can be changed: U, T
Data type: Unsigned32
P-Group: Messages
Min
-
Description:
Sets the signal source for external fault 1.
Dependency:
External fault 1 --> F07860(A)
Refer to: F07860
Note:
An external fault is triggered with a 1/0 signal.
p2107
BI: External fault 2 / External fault 2
CU, TB30, TM31
Can be changed: U, T
Data type: Unsigned32
P-Group: Messages
Min
-
Description:
Sets the signal source for external fault 2.
Dependency:
External fault 2 --> F07861(A)
Refer to: F07861
Note:
An external fault is triggered with a 1/0 signal.
p2107[0...n]
BI: External fault 2 / External fault 2
VECTOR
Can be changed: U, T
Data type: Unsigned32
P-Group: Messages
Min
-
Description:
Sets the signal source for external fault 2.
Dependency:
External fault 2 --> F07861(A)
Refer to: F07861
Note:
An external fault is triggered with a 1/0 signal.
1-252
Data set: -
Units group: -
Max
-
Data set: CDS
Units group: -
Max
-
Data set: -
Units group: -
Max
-
Data set: CDS
Units group: -
Max
-
Siemens AG 2004 All Rights Reserved
SINAMICS G List Manual, Edition 12.2004
Access level: 3
Function diagram: -
Unit selection: -
Factory setting
1
Access level: 3
Function diagram: 2546
Unit selection: -
Factory setting
1
Access level: 3
Function diagram: -
Unit selection: -
Factory setting
1
Access level: 3
Function diagram: 2546
Unit selection: -
Factory setting
1
Hide quick links:
Advertisement
Table of Contents
