Siemens SINAMICS G List Manual page 92

Parameters
Parameter list
r0462[0...2] Encoder serial number part 3 / Enc ser_no 3
VECTOR Can be changed: -
Data type: Unsigned32
P-Group: Encoder
Min
-
Description: Displays the actual serial number part 3 of the appropriate encoder.
Index: [0] = Encoder 1
[1] = Encoder 2
[2] = Encoder 3
Dependency: Refer to: p0441, p0442, p0443, p0444, p0445, r0460, r0461, r0463, r0464
r0463[0...2] Encoder serial number part 4 / Enc ser_no 4
VECTOR Can be changed: -
Data type: Unsigned32
P-Group: Encoder
Min
-
Description: Displays the actual serial number part 4 of the appropriate encoder.
Index: [0] = Encoder 1
[1] = Encoder 2
[2] = Encoder 3
Dependency: Refer to: p0441, p0442, p0443, p0444, p0445, r0460, r0461, r0462, r0464
r0464[0...2] Encoder serial number part 5 / Enc ser_no 5
VECTOR Can be changed: -
Data type: Unsigned32
P-Group: Encoder
Min
-
Description: Displays the actual serial number part 5 of the appropriate encoder.
Index: [0] = Encoder 1
[1] = Encoder 2
[2] = Encoder 3
Dependency: Refer to: p0441, p0442, p0443, p0444, p0445, r0460, r0461, r0462, r0463
r0479[0...2] CO: Diagnostics encoder position actual value Gn_XIST1 / Diag Gn_XIST1
VECTOR Can be changed: -
Data type: Integer32
P-Group: Encoder
Min
-
Description: Displays the encoder actual position value Gn_XIST1 according to PROFIdrive for diagnostics. In contrast to
p0482, the value is updated in each DRIVE-CLiQ basic clock cycle and displayed with sign.
Index: [0] = Encoder 1
[1] = Encoder 2
[2] = Encoder 3
1-92
Data set: -
Units group: -
Max
-
Data set: -
Units group: -
Max
-
Data set: -
Units group: -
Max
-
Data set: -
Units group: -
Max
-
 Siemens AG 2004 All Rights Reserved
SINAMICS G List Manual, Edition 12.2004
Access level: 3
Function diagram: -
Unit selection: -
Factory setting
-
Access level: 3
Function diagram: -
Unit selection: -
Factory setting
-
Access level: 3
Function diagram: -
Unit selection: -
Factory setting
-
Access level: 4
Function diagram: -
Unit selection: -
Factory setting
-