Show Isis Interface - Dell S6000 Reference Manual

Command line for the system

Hide thumbs Also See for S6000:

Table of Contents

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0

Version 8.3.11.1

FTOS#show isis hostname

*F100.E120.0013 Force10

show isis interface

Display detailed IS-IS interface status and configuration information.

show isis interface [interface]

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Introduced on the S6000.

Introduced on the S4820T.

Introduced on the S4810.

Introduced on the Z9000.

Dynamic Name Static Name

(OPTIONAL) Enter the following keywords and slot/port or

number information:

For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE then the slot/port information.

For Loopback interface, enter the keyword loopback

then a number from 0 to 16383.

For a Port Channel interface, enter the keywords port-

channel then a number. The range is from 1 to 128.

For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet then the slot/port information.

For a VLAN, enter the keyword vlan then a number from

EXEC Privilege

Intermediate System to Intermediate System (IS-IS)