Show Isis Interface - Dell PowerConnect J-EX4200-24T Software Manual

show isis interface

Syntax
Syntax (J-EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
Table 225: show isis interface Output Fields
Field Name Field Description
Name of the interface.
interface-name
Routing device selected by other routers that is responsible for sending link-state
Designated router
advertisements that describe the network. Used only on broadcast networks.
Interface index assigned by the Junos OS kernel.
Index
State Internal implementation information.
Circuit id Circuit identifier.
show isis interface
<brief | detail | extensive>
<interface-name>
<logical-system (all | logical-system-name)>
show isis interface
<brief | detail | extensive>
<interface-name>
Command introduced before Junos OS Release 10.2 for J-EX Series switches.
Display status information about Intermediate System-to-Intermediate System
(IS-IS)-enabled interfaces.
none —Display standard information about all IS-IS-enabled interfaces.
—(Optional) Display the specified level of output.
brief | detail | extensive
—(Optional) Display information about the specified interface only.
interface-name
logical-system (all | logical-system-name)
systems or on a particular logical system.
view
show isis interface on page 1853
show isis interface brief on page 1853
show isis interface detail on page 1853
show isis interface extensive on page 1853
show isis interface extensive (with LDP) on page 1854
Table 225 on page 1851 describes the output fields for the
Output fields are listed in the approximate order in which they appear.
Chapter 74: Operational Commands for Layer 3 Protocols
—(Optional) Perform this operation on all logical
show isis interface
command.
Level of Output
detail
detail
detail
detail
detail
1851