1.
CLI Overview
Using the CLI
Displaying DSP Node Physical Interfaces
1
To display the IP addresses of all physical interfaces on the DSP node, issue the following com-
mand:
datera-net interface list --iface=all
2
To display the IP address of a specific physical interface on the DSP node, issue the following
command:
datera-net interface list --iface=ipmi|mgt1|mgt2|netA1|netA2|netB1|netB2
Displaying CLI Help
1
To display a list and short description of all CLI commands, issue the help command.
Local >> help
2
To display the detailed Help for a specific CLI command, use the --help or -h command. For
example:
Local >> datera-net --help
3
Some commands include additional Help for specific subcommands. For example:
Local >> datera-net interface -h
Logging out of the CLI
To log out of the CLI, enter the exit or the quit command:
Local >> exit | quit
The Ctrl-D command also exits the CLI.
6
ETERNUS DSP CLI Reference Guide