Utility Management; Shutdown/Restart Storage System - Fujitsu ETERNUS DX60 S3 User Manual

Chapter 1 System Management

1.5 Utility Management

1.5 Utility Management
This section describes utility management.
Utility management provides the following functions:

• Shutdown/Restart Storage System

• Backup Configuration
• Export Configuration
• Start/Stop Performance Monitoring
• Clear Cache
1.5.1 Shutdown/Restart Storage System
When the ETERNUS DX cannot be shut down directly, perform the shutdown or restart on the screen.
• This function can be used regardless of whether the "Setup Power Management" is enabled or disabled.
• Note that the ETERNUS DX may reboot automatically when "Setup Power Management" is enabled. For
example, an ETERNUS DX that is turned off reboots when receiving a power on request from a server
during turning off the power.
• This function cannot be used when the ETERNUS DX is in the machine down status. Restart the browser
after completion of the process, and then access the login screen after rebooting of the ETERNUS DX is
complete.
■ Shutdown the ETERNUS DX
The procedure to shut down the ETERNUS DX is as follows:
Procedure
1
Click [Shutdown/Restart] in [Action].
64
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0