Show Ip Bgp Dampening-Stats - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

BGP Commands

show ip bgp dampening-stats

Displays BGP dampening statistics.
show ip bgp dampening-stats [ip_address ip_mask] [peer_address]
Syntax Definitions
ip_address
ip_mask
peer_address
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
This command displays various statistics on routes that have flapped, and are thus subject to the settings of
the dampening feature.
Examples
-> show ip bgp dampening-stats
Network
---------------+---------------+---------------+-----+-----------+-----
155.132.44.73
output definitions
Network
Mask
From
Flaps
OmniSwitch CLI Reference Guide
A 32-bit IP address.
A 32-bit subnet mask number that determines how many bits of the IP
address parameter denote the network number.
A 32-bit IP address of peer (neighbor).
Mask From
255.255.255.255 192.40.4.121
The IP address for the local BGP speaker that is responsible for route
dampening in this router.
The mask for the local BGP speaker that is responsible for route damp-
ening in this router.
The IP address for the route that is flapping.
The number of times this route has moved from an UP state to a
DOWN state or from a DOWN state to an UP state. If the route goes
down and then comes back up, then this statistics would count 2 flaps.
March 2011
show ip bgp dampening-stats
Flaps Duration FOM
8 00h:00m:35s 175
page 19-155