Ip Bgp Policy Route-Map Aspath-List - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

BGP Commands

ip bgp policy route-map aspath-list

Assigns an AS path matching list to the route map.
ip bgp policy route-map name sequence_number aspath-list as_name
Syntax Definitions
name
sequence_number
as_name
Defaults
parameter
as_name
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
By default, no AS path list is assigned to a route map.
•
This default behavior can be reset by changing the value of the AS path list name to "none".
•
The ip bgp policy aspath-list
set permit/deny actions for an AS path list.
Examples
-> ip bgp policy route-map routemap1 1 aspath-list aspathlist1
-> ip bgp policy route-map routemap1 1 aspath-list none
Release History
Release 7.1.1; command was introduced.
Related Commands
ip bgp policy prefix6-list
MIB Objects
alaBgpRouteMapTable
alaBgpRouteMapAsPathMatchListId
OmniSwitch CLI Reference Guide
The route map name.
The route map sequence number. The valid range is 1–255.
The AS path list name or "none".
default
none
and ip bgp policy aspath-list action
Creates or deletes a policy route map.
March 2011
ip bgp policy route-map aspath-list
commands are used to create and
page 19-123