Ip Bgp Policy Route-Map Community-Mode - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

ip bgp policy route-map community-mode

ip bgp policy route-map community-mode
Configures the action to be taken for a community string when a match is found.
ip bgp policy route-map name sequence_number community-mode {add | replace}
Syntax Definitions
name
sequence_number
add
replace
Defaults
parameter
add | replace
Platforms Supported
OmniSwitch 10K
Usage Guidelines
This command is used in conjunction with
next line shows the combined usage.
Examples
-> ip bgp policy route-map routemap1 1 community-mode replace
-> ip bgp policy route-map routemap1 1 community 400:1 500:1 community-mode replace
Release History
Release 7.1.1; command was introduced.
page 19-128
The route map name.
The route map sequence number. The valid range is 1–255.
Adds the community string specified in the command
route-map community.
Replaces the community string specified in the command
route-map community.
default
add
ip bgp policy route-map community. The example on the
OmniSwitch CLI Reference Guide
BGP Commands
ip bgp policy
ip bgp policy
March 2011