Ip Bgp Policy Route-Map Match-Prefix - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

ip bgp policy route-map match-prefix

ip bgp policy route-map match-prefix
Configures a matching prefix primitive in the route map.
ip bgp policy route-map name sequence_number match-prefix ip_address
Syntax Definitions
name
sequence_number
ip_address
Defaults
parameter
ip_address
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
This command allows a matching prefix primitive to be placed directly in the route map. By default, no
prefix primitive is specified. The default behavior can be reset by changing the value to "none".
•
The example on the next line shows usage combined with the
command.
Examples
-> ip bgp policy route-map routemap1 1 match-prefix 17.0.0.0
-> ip bgp policy route-map routemap1 1 match-prefix 17.0.0.0 match-mask 255.255.0.0
Release History
Release 7.1.1; command was introduced.
Related Commands
ip bgp policy route-map match-
mask
ip bgp policy prefix6-list
MIB Objects
alaBgpRouteMapTable
alaBgpRouteMapMatchPrefix
page 19-136
The route map name.
The route map sequence number. The valid range is 1–255.
The 32-bit IP address of the matching prefix.
default
0.0.0.0
Configures a matching prefix primitive in the route map.
Configures an AS path matching regular expression primitive in the
route map.
ip bgp policy route-map match-mask
OmniSwitch CLI Reference Guide
BGP Commands
March 2011