Ip Bgp Policy Route-Map Action - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

ip bgp policy route-map action

ip bgp policy route-map action
Configures the action to be taken for a route when a match is found.
ip bgp policy route-map name sequence_number action {permit | deny}
Syntax Definitions
name
sequence_number
permit
deny
Defaultst
parameter
permit | deny
Platforms Supported
OmniSwitch 10K
Usage Guidelines
By default, this command allows routes that match the criteria specified in the route map to pass. If no
matching routes are found, any additional instances (sequence numbers) of the route map name are exam-
ined. When all instances have been examined with no match, the route is dropped.
Examples
-> ip bgp policy route-map routemap1 1 action deny
Release History
Release 7.1.1; command was introduced.
Related Commands
ip bgp policy prefix6-list
MIB Objects
alaBgpRouteMapTable
alaBgpRouteMapAction
page 19-122
A route map name.
A route map sequence number. The valid range is 1–255.
Allows matching routes to pass.
Stops matching routes from passing. In addition, no further instances
(sequence numbers) of the route map are examined.
default
permit
Creates or deletes a policy route map.
OmniSwitch CLI Reference Guide
BGP Commands
March 2011