ip bgp policy route-map weight
ip bgp policy route-map weight
Configures a BGP weight value to be assigned to inbound routes when a match is found.
ip bgp policy route-map name sequence_number weight value
Syntax Definitions
name
sequence_number
value
Defaults
parameter
value
Platforms Supported
OmniSwitch 10K
Usage Guidelines
This command sets the weight value for routes that pass the route map match criteria. It is only applicable
for the inbound policy. The default value of zero means that the weight is not changed by the route map.
Examples
-> ip bgp policy route-map routemap1 1 weight 500
Release History
Release 7.1.1; command was introduced.
Related Commands
ip bgp policy prefix6-list
MIB Objects
alaBgpRouteMapTable
alaBgpRouteMapWeight
page 19-146
The route map name.
The route map sequence number. The valid range is 1–255.
The weight value. The valid range is 0–65535.
default
0
Configures an AS path matching regular expression primitive in the
route map.
OmniSwitch CLI Reference Guide
BGP Commands
March 2011