BGP Commands
ip bgp policy route-map community-list
Assigns a community matching list to the route map.
ip bgp policy route-map name sequence_number community-list name
Syntax Definitions
name
sequence_number
name
Defaults
parameter
name
Platforms Supported
OmniSwitch 10K
Usage Guidelines
By default, no community list is assigned to the route map. The default behavior can be reset by changing
the value to "none".
Examples
-> ip bgp policy route-map routemap1 1 community-list listB
Release History
Release 7.1.1; command was introduced.
Related Commands
ip bgp policy prefix6-list
MIB Objects
alaBgpRouteMapTable
alaBgpRouteMapCommunityMatchListId
OmniSwitch CLI Reference Guide
The route map name.
The route map sequence number. The valid range is 1–255.
The community list name, or "none".
default
none
Creates or deletes a policy route map.
March 2011
ip bgp policy route-map community-list
page 19-127